For the latest news on my mods, join the Discord : https://discord.gg/PK6UdNr
THIS IS A DEMO - FUNCTIONAL PARACHUTES AVAILABLE IN THE FULL VERSION ONLY - more info at the bottom
Latest Update 4.0.0 & 4.0.1:
Additional & universal transbrake features:
-
Transbrake (Hold)
-
New input option as a Hold instead of the vanilla toggle (Make sure to remove the toggle input if used as one will cancel the other and the transbrake won't engage)
-
Bump Box
-
Three new inputs:
-
Bump Transbrake
-
Increase Bump Time
-
Decrease Bump Time
-
All three options are also available in the Vehicle Features radial menu.
-
Delay Box
-
Three new inputs:
-
Toggle Transbrake Delay Box (Hold)
-
Increase Delay
-
Decrease Delay
-
All three options are also available in the Vehicle Features radial menu.
-
Transbrake Two-Step
-
Option to activate the vanilla Two-Step while the transbrake is engaged, without holding the brakes.
-
Available in the Two-Step settings submenu in the Vehicle Features radial menu.
-
These features work with all transmissions equipped with a transbrake.
-
4.0.1:
-
Updated config previews
-
Bug fixes
** All new inputs are under the "Meo's Drag Parts" tab in the control settings*
**4-Link Guide **
Guide:
Suspension setup tips:
(this is generally speaking, tuning may vary depending on the vehicle setup and power)
-
Squat:
-
Lower Bump
-
Higher Rebound
-
Separation
-
Higher Bump
-
Lower Rebound
-
Higher Spring Height with lower Spring Rate OR more Additional Extension Limit
Update 3.0.33:
-
Added 4-Link Rear suspension to:
-
Cherrier Ardente
-
Cherrier Vivace
-
Cherrier Tograc
-
Added RWD drag configs for:
-
Cherrier Ardente
-
Cherrier Vivace
Update 3.0.30, 3.0.31 & 3.0.32:
-
Bug fix (weak swaybars)
-
Sorted custom configs in their proper categories
-
Added 4-Link Rear Axle model customization:
-
9-inch
-
12 bolts
Update 3.0.29
- Added Debug options and a guide to tune the 4-link
Update 3.0.27
- Added support for the Cherrier Ardente
- Updated Cherrier Vivace config
- Bug fixes
Update 3.0.25:
- Bug fixes
- Grand Marshal 4-Link Improvement
- BX 4-Link Improvement
Update 3.0.23:
-
Added "Meo's Variable locking converter", the 2.0 version my variable converter
-
Same as it first version, but with lockup settings and wider tune ranges and bug fixes
-
Updated the Barstow config
-
Bug fixes
Update 3.0.22:
- Added parachutes to the MD-Series, Wigeon and Pigeon
- Added 4-link to the Pigeon
- Added a wide bed and bed bars to the Pigeon
- Added a config to the Pigeon
Update 3.0.21:
- Added 4-Link suspension to the ETK-800
- Updated ETK-800 "Meo's Drag" config
- Bug fixes
Update 3.0.20:
- Added Release Handle inside vehicles
Update 3.0.19:
- Bug fixes
Update 3.0.18:
-
Added "Indestructible Engine Block" option to the Xtrem NO2 shot
-
Tweaked some 4-Link default geometry and range to allow better Separation
-
Tweaked some Drag configs
-
Added a new variable to rear drag springs: "Additional Extension Limit"
-
This allows the spring to work as before in compression, but can now have free play in extension. Can be useful for radial build with wheel separation
-
Bug fixes
Update 3.0.17:
- Added 4-Link rear suspension to the ETK-C
- Added a new config to the ETK-C
- Adjustable front hub weight variable on Front Welp Rancing Wheels (not as optimal as frame mounted ballasts, but this will be universal and compatible with other mods
Update 3.0.16:
- Added support for the Ibishu Hopper
- Added shift point options to "Meo's Drag Transmission"
- Added 8-Lug Heavy Rear hub to the Bruckell Nine's 4-Link
- Added WheelieBar and Parachute bag to more vanilla vehicles
- Added X-trem JATO to Hirochi HT-55
Update 3.0.14:
- 15x16 Tires Bug fix
- Added Dually 15x10 rear wheels
- 15x10 Alder Drag Welp Racing Rear Wheels (Dually)
- since true duallies are not compatible with regular lugs, these are coded as singular wide wheels
Update 3.0.13:
- Bug Fix
Update 3.0.12:
- Added Pro Drag 4-Link Rear suspension on the Hirochi Sunburst
Update 3.0.11:
- Added support to Gavril H-Series
- Added 4-Link suspension to Gavril H-Series
- Added 'Pro Drag Rear Coilovers' to the bx that allow more tuning options with better separation tune support
- Minor Bug fix
Update 3.0.9:
- Updated the Burnside Special and the Miramar (0.36 refresh)
Update 3.0.8:
- Added support for the Civetta Bolide
Update 3.0.7:
- Added Pro Drag 4-Link Rear suspension on the Burnside Special
Update 3.0.6:
- Added Pro Drag 4-Link Rear suspension on the Gavril Bluebuck
Update 3.0.5:
- Added Pro Drag 4-Link Rear suspension on the Gavril Grand Marshal
Update 3.0.4:
- Bug fixes
- Added Weight ballast option to the parachute rack
Update 3.0.3:
- Added Pro Drag 4-Link Rear suspension on the Bastion
Update 3.0.2:
- Added Pro Drag 4-Link Rear suspension on the Moonhawk
Version 3.0.0 (Demo):
-
Updated All Configs
-
Fully modeled Pro Drag 4-Link Suspension:
-
Realistic Wheeliebar slot
-
Fully Adjustable geometry
-
Customizable color
-
Custom Jbeam
-
Fully modeled
-
Available on (so far):
-
Barstow
-
Bastion
-
Bluebuck
-
BX-Series
-
Burnside Special
-
Bruckell Nine
-
D-Series (and Garvil Roamer or any vehicle/mod based on the pickup)
-
Grand Marshal
-
H-Series
-
Miramar
-
Moonhawk
-
Sunburst
-
and more!
-
Adjustable wheeliebar
-
New realistic wheeliebar attached to the rear axle
-
Customizable Color
-
Custom model
-
Fully Adjustable in the tuning tab:
-
Length
-
Width
-
Angle
-
Stiffness
-
Left-Right Preload
-
New parachute bags
-
Updated all parachute bags to the 2.0 version
-
Added parachute rack on the towhitch of the majority of the vanilla vehicle
-
New materials (textured)
-
Acurate Jbeam (Rope and safety flag move)
-
Not an extension of the bumper anymore
-
Can still be found in the bumper slot, but is actually attached to the frame
-
FUNCTIONNAL PARACHUTES AVAILABLE ON PATREON
-
Updated Welp wheels
-
Added an option to enable/disable self collisions(usefull on some vehicle where to tire collision prevent the suspension to go lower like on the pickup)
-
Changed slot positions for better readability and to be easier to use and customize
-
Added 17x4 rear wheels
-
Updated Drag Tires (Front - Rear - All sizes)
-
Removed "Pro Street" tires (the tires with the sport threaded texture)
-
Renamed the tires to "Meo's Pro Drag ... tires"
-
Added look options (9 different beamng vanilla texture)
-
Drag Slick
-
Drag Radial
-
Racing Slick
-
Radial T/A
-
Sport
-
Thin Whitewall
-
Thin Redwall
-
Vintage
-
All-Terrain
UPDATE (2.48)
-
Added parts to Legran and BX-Series -Added 8-Slots wheels (Nascar style)
-
Better Pickup drag suspension
-
Bug fixes
This mod adds drag parts, wheels, tires and better NOS Wheels:
New "Alder Drag Welp Racing" wheels
4-5-6 lugs : 15x4 - 15x7 - 15x10 - 15x12 - 15x14 - 15x16 - 15x9 - 17x4 - 17x9
6 different models with various color options
BeamNG's Wheels but drag size (15x10-12-14) Clockwise 533, Cherrier Vivace S wheels, 4-slots
Tires:
- Grip-All Pro Drag
- Grip-All Pro Street
- Grip-All Dunes
*Various Sizes 15x10, 15x12, 15x14 and 15x16 with variable grip
"pro drag" brakes and axles with more clearance
Parts: For*: barstow - bastion - moonhawk - marshal - bluebuck - etk-i - burnside - covet - pickup - roamer - etk-k - BX-Series - miramar - vivace - sunburst - Legran*
Pro Drag Adjustable transmission - Adjustable torque converter:
- Selectable number of speeds
- adjustable shift time
- adjustable torque loss
- adjustable stall
Wings : Painted or carbon versions Parachute bags: *Single or Double (rear bumper / bumperguards section) Wheelie Bar: Realistic wheelie bar now adjustable (FOR VEHICLES THAT DON'T HAVE WHEELIE BAR, IT'S IN THE TOW HITCH SECTION)
Barstow specefic parts: GT Body - pro drag transracing - fuel cell - tubular chassis Racing Rad: - Pro Drag Radiator (extrem effectiveness) Suspension parts: -Drag axle with more variable offset so the wheels are not touching the fenders -Drag Spring with Left/Right height adjustment -Drag more adjustable sway bar -Drag drivechafts
Nos: Xtrem varaiable (up to 5000kw)
DO NOT REPOST ANY FILE
Take a look at my other mod, pretty sure it'll interest you if you like this one : https://www.beamng.com/resources/meos-funny-car-engines.11071/
If you want to support me, I have a Patreon with early access to new mods and updates: https://www.patreon.com/Meo_3000_QC Mods are updated when I do something new so you can help me to find possible bugs. There's also mods while they are in development like these :
-
Lastest BeamNG content suppport
-
Functional Parachutes
-
2 looks: Cross & Triangular
-
Now get soft at low speed
-
Adjustable Locking Torque Converter
-
Release Handle Kit with functional handle inside the vehicles
-
Pro 4-Link on even more vehicles and a second style option
-
500 CUI Revamped
-
454 LSX Revamped
-
Top Fuel / FunnyCar
-
Offroad parts
-
Other Engines: (3.0L I6 & 8.4L V10)
-
Meo's System Override
-
Override engine durability (indestructible engines)
-
Override cooling system
-
Override Driving safety system
-
Override Transmission (#gear, torque converter, clutch, transbrake)
-
Engine Power multiplier
-
Engine Induction -> Supercharger and Turbo on anything!
-
Works on every vehicles (even on mods)